Walton Tap Extractors, Tap Extensions, Pipe; Stud Extractors and Ergonomic File Handles

 
 
单价 面议对比
询价 暂无
浏览 886
发货 USAConnecticut
过期 长期有效
更新 2013-03-10 22:50
 






详细说明
 Since 1908, the Walton Company has been the leading manufacturer of tap removal tools in the world. Our one goal has always been to provide our customers with safe, economical and efficient tools to get the job done. During the past 100 years we have added to our original line of Walton Tap Extractors, the "REPS" line of Pipe, Stud & Screw Extractors and our Tap Extensions for both machine and hand tapping. Walton Company also offers the Piloted Spindle Tapper and our newest product, the Ergonomic File Handle. Today, we believe that we have the best products for removing broken taps, pipes, studs and screws plus tapping tools for the automotive, mechanical and plumbing industries.

Walton Tools

Tap Extractors

Tap Extractors

Walton Tap Extractors remove broken taps simply and safely and are available in every tap size. Extractors are designed specifically for:

  • #4 to 1-1/2" machine screw and hand taps
  • 3mm to 38mm taps, in all standard flute sizes
  • 1/8" to 1" Pipe Taps
  • #4 to 5/8” Helical Coil "STI" Taps

Tap Extractors are available in standard or custom sets of 6 to 15 tools per set. All sets are packed in a sturdy molded plastic case.

Tap Extensions

Tap Extensions

Walton Tap Extensions extend the reach of standard taps and allow tapping in deep holes and awkward locations. Two styles of tape extensions are available:

  • Style B – for both machine and hand tapping. Extensions are 8" long and available in the following sizes: #0 to 1-1/2" (1.6mm to 38mm) for standard taps, and 1/16" to 1" for pipe taps.
  • Style A – for hand tapping only. Very handy for tapping in close quarters where it is difficult or impossible to turn a tap wrench. Available for tap sizes #10 (3/16") to 1", each set contains two 5" long extensions. Can be used either alone (to lengthen the tap 5") or in combination (to lengthen the tap 10").

Use of either Style A or Style B Tap Extensions will virtually eliminate the need for costly, special-length taps. They can be used over and over because they won't wear out, become dull or break.

REPS – Pipe, Stud and Screw Extractors

Pipe, Stud and Screw Extractors

With REPS Pipe, Stud and Screw Extractors on hand, you are assured that expensive machinery will not be damaged by makeshift methods of removing broken pipes and studs. REPS Extractors work by pulling, rather than reaming, and are designed for strength, durability and easy handling.

These tools feature a four-point shallow grip, assuring a strong bite with less expansion and jamming. When time is vital, REPS Pipe and Stud Extractors will save many times their moderate cost by easily removing stud and screw sizes from 3/8" to 3-1/2" and every size and class of pipe from 1/8" to 2".

Ergonomic File Handle

Ergonomic File Handle

The Walton Ergonomic File Handle's design incorporates the natural wrist angle of approximately 35°. The handle is constructed such that the tool's axis is better aligned with the forearm, significantly reducing muscle fatigue. It allows the operator to rotate the arm slightly to change the angle of the file, while still applying the necessary pressure to keep the file in contact with the workpiece. Studies show that even repetitive filing jobs have become more comfortable, safe and efficient as a result of this design.

The grooved surface of the handle provides a perfect non-slip grip for the hand. It makes repetitive filing tasks even more comfortable to perform. Available in four sizes, to fit files from 4" to 14".

Piloted Spindle Tapper

Piloted Spindle Tapper

This tapping accessory, for drill presses or lathes, is used for threading a drilled hole manually at one machine location, without moving the workpiece. During tapping operations, the spindle of the drill press serves as a support for the guide post of this tool. It may also be utilized to raise or lower the tap or to hold it in a lifted position while the work is shifted and centered. Better than a hand-held tap wrench, this tapper does not need separate stands, guides or similar devices – the tap follows the correct lead, assuring true alignment.

Two models are available: No. 176, with a tap size capacity of #0 to 1/4" (1.5mm to 6mm), and No. 276, for tap sizes #12 to 1/2" (6mm to 12mm).

 


Warning: For maximum safety when using Walton tools, please wear protective eyewear and carefully read and follow the accompanying instructions on proper operation.

评论 0
更多>同类EHS服务供应
最全面的的地面防滑处理解决方案 防滑液工程 全国上门施工 EHSCity全方位防撞解决方案  Total Damage Prevention EHSCity 开放式降温系统,厂房,车间,室外,广场  均可降温 叉车现场作业安全解决方案 Pacific Handy Cutter Inc S7® Safety Cutter - Safety and Versatility 高空作业车销售、租赁、维修和培训服务 防爆风机,风扇IIC,IIB, IIA爆炸性气体环境, 一区二区防爆 EHSCity 整体厂房通风除尘恒温恒湿 系统 服务
网站首页  |  关于EHSCity  |  产品服务  |  联系方式  |  版权隐私  |  隐私政策  |  EHS微信群 EHS论坛  |  网站地图  |  排名推广  |  广告服务  |  网站留言  |  RSS订阅  |  违规举报  |  粤ICP备19037413号