NewPig 聚乙烯盛漏托盘 PAK210 Poly Spill Containment Pallet

价格 3535.00对比
发货 上海
销量 暂无
评价 已有 0 条评价
人气 已有 476 人关注
数量
+-
库存100
 







 PIG® 聚乙烯盛漏托盘可接住泄漏、滴漏及溢漏,保持地板干爽,工人安全。盛漏托盘控制圆桶存放区内的液体,使地板保持干燥安全

• 250 升的盛液箱可盛装泄漏、滴漏及溢漏液体
• 可拆卸的防滑格栅不会在负载下断裂
• 托盘抗紫外线、防锈、防腐蚀并可抗多数化学品
• PAK605 仅供存放钢桶,卸载后可用叉车移动
• 在存放钢桶或聚乙烯桶方面,PAK210 的负载能力更强
• PIG® 聚乙烯圆桶装载坡道(PAK734)与 PAK210 配合使用

产品描述

  • 2,722kg UDL负载能力足以支撑四只满载钢桶或聚乙烯桶
  • 双向叉车口可向任一方向轻松移动圆桶(只限已卸载)
  • 250 升污水箱可围堵漏液(泄漏、滴漏及溢漏), 保持存放区清洁、安全
  • 25cm的高度使得圆桶装卸更省力,桶顶更伸手可及
  • 紧凑的空间设计减少圆桶储存所占面积
  • 低密度聚乙烯结构可长期抗紫外线、防锈、防腐蚀,抗多数化学品
  • 防滑格栅在重压下不会破裂,提起后可轻松存取污水箱
  • 无需移动圆桶或格栅,可选排污螺塞就可让你方便地排空污水箱
  • 嵌套设计使托盘在不使用时可以堆着放,节省空间;降低散装运输成本;
  • 黑色可隐藏托盘污垢,使托盘保持整洁的外观
  • 注:如果在易燃液体的处理中使用本产品,请遵守有关储存和装卸易燃液体的安全规章守则,尤其是要考虑到易燃蒸汽,静电放电和热源的影响。

Description

  • The strongest standard pallet you can buy for everyday drum storage
  • 6,000-lb. UDL capacity is strong enough to support four fully loaded steel or poly drums
  • Low 10" height means loading and unloading require less effort and drum tops are within easier reach
  • Molded-in sump catches leaks, drips and spills to help you comply with regulations and keep your storage areas clean and safe
  • Low-density polyethylene (LDPE) construction resists UV rays, rust, corrosion and most chemicals
  • Textured grating adds traction and lifts out for easy sump access
  • 2-way forklift entry allows easy movement from either direction (unloaded only)
  • Nestable design permits stacking when not in use; lowers cost of bulk shipping
  • Compact footprint reduces floor space needed for drum storage
  • Optional drain plug lets you empty sump without removing drums or grating
  • We test all of our PIG Containment Pallet designs at max load for months to ensure they can handle full capacity at your facility

Additional Information

  • Product Data Sheet (PDS)
  • Chemical Compatibility for LDPE Products

40 CFR 112.7 - SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States.

40 CFR 122.26 - When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways.

40 CFR 264.175 - Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers, or the volume of the largest container, whichever is greater."

 
  • Flammables Notice
    If using this product with flammable liquids, please consider the regulations that apply to storage and handling of flammable liquids and the safety of this application, specifically flammable vapors, static discharge and heat sources. For further assistance, please call Technical Services.

产品规格

颜色:

黑色

 

尺寸:

130cm宽 x 130cm长 x 25cm高

 

再生成分比例:

40%后工业可再生聚乙烯

 

负载能力:

2722kg UDL 负载能力

 

污水容量:

250L 污水容量

 

尺寸(格栅):

122cm 宽 x 122cm 长

 

销售规格:

单个

 

重量:

36.3 kg

 

数量/托盘:

12

 

成份:

100% 抗紫外线聚乙烯(低密度聚乙烯)

网站首页  |  关于EHSCity  |  产品服务  |  联系方式  |  版权隐私  |  隐私政策  |  EHS微信群 EHS论坛  |  网站地图  |  排名推广  |  广告服务  |  网站留言  |  RSS订阅  |  违规举报  |  粤ICP备19037413号